{"title":"MS Schippers Coatings Promo","description":"","products":[{"product_id":"ms-pigment","title":"MS Pigment","description":"\u003cp\u003eThe MS Pigment™ is a pigment addition for MSE Floorequalcoat-trans™ (66309967-COMP-A and 66309967-COMP-B). With this pigment the MSE Floorequalcoat-trans™ is coloured, with the result that the transparency of the MSE Floorequalcoat-trans™ disappears. With MS Pigment, one-layered coloured floors can be made instantly. Use: Mix MSE Floorequalcoat-trans™ component A and component B for more or less 30 seconds. Add MS Pigment to the mixture and mix until the mixture is homogeneous. 400 grams MS Pigment™ is needed for a big package of MSE Floorequalcoat-trans™ (25 kg). 80 grams MS Pigment™ is needed for a small package of MSE Floorequalcoat-trans™ (5 kg).\u003c\/p\u003e","brand":"Farmers Depot","offers":[{"title":"Green","offer_id":50183810089207,"sku":"0007230","price":63.0,"currency_code":"CAD","in_stock":true},{"title":"Grey","offer_id":50184015511799,"sku":"0007231","price":40.0,"currency_code":"CAD","in_stock":true},{"title":"Red","offer_id":50184015577335,"sku":"0007232","price":63.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0872\/9319\/8583\/files\/66309760_1-Z.jpg?v=1762364930"},{"product_id":"ms-cementex-10l","title":"MS Cementex 10L","description":"\u003cp\u003eMS Cementex is a highly concentrated product based on phosphoric acid. It cleans floors that are polluted with fat and protein, takes away weak cement veil \/milk and provides a neutral surface for applying the coating.\u003c\/p\u003e","brand":"Farmers Depot","offers":[{"title":"Default Title","offer_id":50184513913079,"sku":"0007226","price":175.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0872\/9319\/8583\/files\/66304607-10_1-Z.jpg?v=1762374154"},{"product_id":"mse-floorcoat-7001-10-kg-kit","title":"MSE FLOORCOAT-7001 10 KG KIT","description":"\u003cp\u003eThe MSE Floorcoat is a unique 2-component epoxy floor coating with a very high resistance against ammonia, acids and the most common chemicals in intensive farming. The product is also a very good mechanical resistant. It is suitable after applying the first layer MSE-100 Primecoat-trans. It can also be used as a topcoat or as an intermediate layer if you use a non-slip material. It can only be used in combination with B-component. Pack sizes: 1,5 and 10 kg. Consumption: 0.2 to 0.7 kg\/m² per layer, depending on substrate and sprinkled non-slip material. Consumption intermediate layer: 0.2 to 0.4 kg\/m². Consumption finish layer without non-slip: 0.2 to 0.4 kg\/m². Consumption finish layer on Silver sand: 0.5 to 0.6 kg\/m². Drying time: 16-24 hours depending on the temperature of the environment. Mixture ratio: Packed in sets, so mix the A-comp and B-comp. Working temperature: between 10°C and 25°C. Application material: roller\/scoop, brushes, mixer. Substrate: MSE Primecoat-trans or MSE Floorcoat treated floor. Other RAL-colours are available when ordering over 100 kg.\u003c\/p\u003e","brand":"Farmers Depot","offers":[{"title":"Default Title","offer_id":50603443519735,"sku":null,"price":340.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0872\/9319\/8583\/files\/66309801.jpg?v=1773679899"},{"product_id":"mse-floorcoat-7001-5-kg-kit","title":"MSE FLOORCOAT-7001 5 KG KIT","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe MSE Floorcoat is a unique 2-component epoxy floor coating with a very high resistance against ammonia, acids and the most common chemicals in intensive farming. The product is also a very good mechanical resistant. It is suitable after applying the first layer MSE-100 Primecoat-trans. It can also be used as a topcoat or as an intermediate layer if you use a non-slip material. Can only be used in combination with B-component. Pack sizes: 1,5 and 10 kg. Consumption: 0.2 to 0.7 kg\/m² per layer, depending on substrate and sprinkled non-slip material. Consumption intermediate layer: 0.2 to 0.4 kg\/m². Consumption finish layer without non-slip: 0.2 to 0.4 kg\/m². Consumption finish layer on Silver sand: 0.5 to 0.6 kg\/m². Drying time: 16-24 hours depending on the temperature of the environment. Mixture ratio: Packed in sets, so mix the A-comp and B-comp. Working temperature: between 10°C and 25°C. Application material: roller\/scoop, brushes, mixer. Substrate: MSE Primecoat-trans or MSE Floorcoat treated floor. Other RAL-colours are available when ordering over 100 kg.\u003c\/p\u003e","brand":"Farmers Depot","offers":[{"title":"Default Title","offer_id":50603477795063,"sku":null,"price":193.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0872\/9319\/8583\/files\/66309800.jpg?v=1773682009"},{"product_id":"mse-floorequalcoat-trans-25-kg-kit","title":"MSE FLOOREQUALCOAT-TRANS 25 KG KIT","description":"\u003cp\u003eThe MSE Floorequalcoat-trans™ is a unique high quality two-components self equalizing epoxy coating with a very high mechanical and chemical durability. This is a unique, durable and high quality product with many application possibilities in the intensive livestock farming. Is often used in feeding troughs, cattle farming, remediation (meat) poultry houses, garages\/workshops or as a bottom layer in combination with other coating layers. Consumption: 2 to 5 kg\/m², strongly dependent on the condition of the substrate. Drying time: 24 hours, depending on the temperature of the environment. Mixture ratio: will be delivered in sets, mix A and B-comp. Working temperature: Between 15°C and 25°C. Working time after mixing: 25 minutes. Application material: scoop\/squeegee, roller, spiked roller, large mixer. Substrate: absorbent pull\/press resistant floor, concrete, cement deck.\u003c\/p\u003e","brand":"Farmers Depot","offers":[{"title":"Default Title","offer_id":50603478417655,"sku":null,"price":535.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0872\/9319\/8583\/files\/66309967.jpg?v=1773682316"},{"product_id":"mse-mortar-forte-set-natural-28-kg-kit","title":"MSE MORTAR FORTE SET NATURAL 28 KG KIT","description":"\u003cp\u003eA component of the MSE Mortar Forte 28 kg set. Can only be used in combination with B component of article series 6304210 and the C component of the article series 6304220. The MSE Mortar Forte is an unique mortar coating consisting of 2 components epoxy resin mixed with a third component: quartz sand. The quartz sand is specially selected and is suitable for non-slip applications in livestock farming because of its angular structure. By the application of the special epoxy resin the floor will be made of high and durable quality; easy to clean, resistant to pressure and a large amount of chemicals. The MSE Mortar Forte is very useable in various sectors. Available in the colours natural, blue, red and green. Composition consists of 2 components resin and 1 component quartz sand of 25kg. Consumption: ± 12 to15 kg per m². Drying time: 24 hours depending on the temperature of the environment. Mixture ratio: component A, -B and –C are packed in the correct proportion to prepare 28 kg MSE Mortar Forte. Working temperature: between 15 °C and 25 °C. Minimum thickness of the layer: minimal 5 mm, average 7-8 mm.\u003c\/p\u003e","brand":"Farmers Depot","offers":[{"title":"Default Title","offer_id":50603500601591,"sku":null,"price":260.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0872\/9319\/8583\/files\/66304210NAT.jpg?v=1773682718"},{"product_id":"mse-primecoat-trans-1-kg-kit","title":"MSE PRIMECOAT-TRANS 1 KG KIT","description":"\u003cp\u003eSpecial transparent Primecoat, based on two component epoxy that must be applied on a prepared substrate to ensure a good adhesion of the coating products. Applying Primecoat is always strictly necessary to optimize the adhesion. MS primer is a glue that has been specially developed as a basic layer for coating products. By using this primer we guarantee optimal attachment for years. The Primecoat can also be used as a topcoat on floors and grills. Consumption: 0.15 to 0.25 kg\/m² (0.015 to 0.025kg\/sqft) per layer, depending on the substrate and the purpose of use. Drying time: 16-24 hours depending on the temperature of the environment. Working temperature: between 10 °C and 25 °C. Working time after mixing: 25 minutes. Application material: roller\/scoop, brushes, mixer. Substrate: absorbing substrate, press\/pull resistant concrete, concrete decks and walls.\u003c\/p\u003e","brand":"Farmers Depot","offers":[{"title":"Default Title","offer_id":50604885016823,"sku":null,"price":77.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0872\/9319\/8583\/files\/66305382.jpg?v=1773755755"},{"product_id":"mse-primecoat-trans-5-kg-kit","title":"MSE PRIMECOAT - TRANS 5 KG KIT","description":"\u003cp\u003eSpecial transparent Primecoat, based on two component epoxy that must be applied on a prepared substrate to ensure a good adhesion of the coating products. Applying Primecoat is always strictly necessary to optimize the adhesion. MS primer is a glue that has been specially developed as a basic layer for coating products. By using this primer we guarantee optimal attachment for years. The Primecoat can also be used as a topcoat on floors and grills. Consumption: 0.15 to 0.25 kg\/m² (0.015 to 0.025kg\/sqft) per layer, depending on the substrate and the purpose of use. Drying time: 16-24 hours depending on the temperature of the environment. Working temperature: between 10 °C and 25 °C. Working time after mixing: 25 minutes. Application material: roller\/scoop, brushes, mixer. Substrate: absorbing substrate, press\/pull resistant concrete, concrete decks and walls.\u003c\/p\u003e","brand":"Farmers Depot","offers":[{"title":"Default Title","offer_id":50604886327543,"sku":null,"price":231.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0872\/9319\/8583\/files\/66309804.jpg?v=1773756029"},{"product_id":"mse-primecoat-trans-60-kg-kit","title":"MSE PRIMECOAT - TRANS 60 KG KIT","description":"\u003cp\u003eSpecial transparent Primecoat, based on two component epoxy that must be applied on a prepared substrate to ensure a good adhesion of the coating products. Applying Primecoat is always strictly necessary to optimize the adhesion. MS primer is a glue that has been specially developed as a basic layer for coating products. By using this primer we guarantee optimal attachment for years. The Primecoat can also be used as a topcoat on floors and grills. Consumption: 0.15 to 0.25 kg\/m² (0.015 to 0.025kg\/sqft) per layer, depending on the substrate and the purpose of use. Drying time: 16-24 hours depending on the temperature of the environment. Working temperature: between 10 °C and 25 °C. Working time after mixing: 25 minutes. Application material: roller\/scoop, brushes, mixer. Substrate: absorbing substrate, press\/pull resistant concrete, concrete decks and walls.\u003c\/p\u003e","brand":"Farmers Depot","offers":[{"title":"Default Title","offer_id":50604888097015,"sku":null,"price":1945.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0872\/9319\/8583\/files\/66309820.jpg?v=1773756172"},{"product_id":"mse-floor-equal-coat-trans-5-kg-kit","title":"MSE Floor Equal Coat Trans 5 kg Kit","description":"\u003cp\u003eThe MSE Floorequalcoat-trans™ is a unique high quality two-components self equalizing epoxy coating with a very high mechanical and chemical durability. This is a unique, durable and high quality product with many application possibilities in the intensive livestock farming. Is often used in feeding troughs, cattle farming, remediation (meat) poultry houses, garages\/workshops or as a bottom layer in combination with other coating layers. Consumption: 2 to 5 kg\/m², strongly dependent on the condition of the substrate. Drying time: 24 hours, depending on the temperature of the environment. Mixture ratio: will be delivered in sets, mix A and B-comp. Working temperature: Between 15°C and 25°C. Working time after mixing: 25 minutes. Application material: scoop\/squeegee, roller, spiked roller, large mixer. Substrate: absorbent pull\/press resistant floor, concrete, cement deck.\u003c\/p\u003e","brand":"Farmers Depot","offers":[{"title":"Default Title","offer_id":50607848554743,"sku":null,"price":148.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"mse-wallcoat-7001-5-kg-kit","title":"MSE Wallcoat-7001 5 kg Kit","description":"\u003cp\u003eThe MSE Wall coat is a unique 2-component epoxy wall coating with a very high resistance against ammonia, acids and the most common chemicals in intensive farming. It is suitable after applying the first layer MSE-100 Primecoat-trans, depending on the substrate suitable for a 1 layer or 2 layers. We advise to apply 2 layers of 300 grams for a high quality end result. It can only be used in combination with B-component. Pack sizes: 5 kg. Consumption: 0.2 to 0.3 kg\/m² per layer, depending on the absorption of the substrate and the amount of applied layers: 1 or 2 pieces. Drying time: 16-24 hours depending on the temperature of the environment. Mixture ratio: Packed in sets, so mix the A-comp and B-comp. Working temperature: between 10°C and 25°C. Working time after mixing: 25 minutes. Substrate: MSE Primecoat-trans or MSE Wall gel treated floor. Application material: roller, brushes, mixer. Other RAL-colours are available when ordering over 100 kg.\u003c\/p\u003e","brand":"Farmers Depot","offers":[{"title":"Default Title","offer_id":50607938961655,"sku":null,"price":193.0,"currency_code":"CAD","in_stock":true}]}],"url":"https:\/\/farmersdepot.ca\/collections\/ms-schippers-coatings-promo.oembed","provider":"Farmers Depot","version":"1.0","type":"link"}